AND
MODEL
INDEX
BN-240 Information Page
FEDERAL MODELS
|
BN240I1 & BN240I6 INTERCHANGE |
| BN240I7 & BN240I8 INTERCHANGE |
| BN240L1 & BN240M INTERCHANGE |
| Part # | Neck Length | Sensors | Hanger on Body | Hanger on Pipe | Additional Info | ||||
| BN-240A | rear: 10" | 2 | 1 | 2" pipe, 4 1/2" center bolt angled flat rear flange | |||||
| BN240AA | rear: 10" | 2 | 2 | 2" pipe, 4 1/2" center bolt, angled flat rear flange | |||||
| rear: 9 1/2" | 2 | 1 3/4" pipe, 4 1/2" center bolt angled flat rear flange | |||||||
| BN-240BB | rear: 9 1/2" | sensor in front of each body | 1 | 1 | 1 3/4" pipe, 4 1/2" center bolt angled flat rear flange | ||||
| BN-240C | rear: 10 1/2" | 2 | 2" pipe, 4" center bolt straight spring loaded rear flange | ||||||
| rear: 9 1/2" | 2 | 2" pipe, 4 1/2" center bolt flat STRAIGHT rear flange, (SHO models) | |||||||
| BN-240D2 | rear: 9 1/2" | 2 | 2" pipe, 4 1/2" center bolt flat TWISTED flat flange, (SHO models) | ||||||
| BN-240F | 2 | 1 3/4" pipe, 4" center bolt straight spring loaded rear flange | |||||||
| BN-240G1 |
front: 11 1/2" rear: 12" |
4 in pipes | 5" & 7" | 16 3/4" between flanges | |||||
| BN-240G2 |
front: 12" rear: 12" |
4 in pipes | 4 1/2" | 3 1/2" welded on bottom of pipe | 16 3/4" between flanges | ||||
| BN-240G3 |
front: 12" rear: 12" |
4 in pipes | 7 1/2" | 5" welded on top of pipe | 16 3/4" between flanges | ||||
| Part # | Neck Length | Sensors | Hanger on Body | Hanger on Pipe | Additional Info | ||||
| BN-240G4 |
front: 13 1/2" rear: 12" |
4 in pipes | 4 1/2" | 3 1/2" | 20" between flanges | ||||
| BN-240G5 |
front: 13 1/2" rear: 12" |
4 in pipes | 7 3/4" | 5" | 20" between flanges | ||||
| BN-240G6 |
front: 12" rear: 12" |
2 in front pipes | 7 3/4" | 5" | 16 3/4" between flanges | ||||
| BN-240G7 |
front: 3" rear: 11 1/2" |
1 on front neck @ 12:00 | 7 3/4" | 4 1/2" | 3 converter set-up, 11 1/2" between flanges, rear flat flange | ||||
| BN-240G8 |
front: 3" rear 11 1/2" |
2 on front neck @1:00 | 0 | 4 1/2" & 7 3/4" | 3 converter set-up, 21 1/4" between flanges, formed front flange | ||||
| BN-240H |
front: 20 1/2" rear: 12" |
4 in pipes | 4 1/2" | 3 1/2" | 21 1/2" between flanges | ||||
| BN-240I1 |
front: 12" rear: 10" |
1-2" below front flange, 1 in rear body on side, 1-1 1/2" below front flange, 1-12 1/4" below front body | 6 1/4"
|
20" between flanges; w/shields on pipes, 3.8L engine only | |||||
| BN-240I2 |
front: 11 3/4" rear: 10 1/2" |
1-2" below left flange, 1-1/2" below body, 1-1 1/4" below front flange, 1-12 1/2" below front body | 2 together, 3 1/4" and 6" | 19 3/4" between flanges | |||||
| BN-240I3 |
front: 12 1/4" rear: 10 1/4" |
|
6" | 19 3/4" between flanges; w/o shields on pipes, 3.8L engine only | |||||
| Part # | Neck Length | Sensors | Hanger on Body | Hanger on Pipe | Additional Info | ||||
| BN-240I4 |
front: 12" rear: 12" |
3 in pipes, 1 in body; front sensor pointing towards driver side | 6" | 5 1/2" | 17 3/4" between flanges, 3.0L engine only | ||||
| BN-240I5 |
|
V
hanger-hole in straight hanger
slot in bent hanger, 6 1/4" long |
rear flat flange, shield top and bottom of pipe, 3.0L engine only | ||||||
| BN-240I6 |
front: 11 1/2" rear: 10 1/4" |
1 - 2 1/4" rear flange, 1 in rear body on side, 1 - 1 1/4" below front flange, 1 - 12" below front body (front right sensor points to left side) | 6 1/2" | 4 bolt rear flange, 19 3/4" between flanges, 3.8L engine only | |||||
| BN-240I7 |
front: 12" rear: 10" |
1-1 1/2" below rear flange, 1 in rear body on side, 1-1 1/4" below front flange (pointing towards passenger side), 1-12" below front body | 6" | 20" between flanges, 3.0L engine only | |||||
| BN-240I8 |
front: 11 1/2" rear: 10 1/4" |
3 in pipes, 1 in rear of body (front right sensor points to right side) | 6 1/2" | 4 bolt rear flange, 19 3/4" between flanges, 3.0L engine only | |||||
| BN-240K |
front:16" rear: 11" |
4 in pipes | 3 1/4" | 4 1/2" | 19 1/2" between flanges | ||||
| BN-240L1 |
front: 10" rear: 10" |
2 in pipes, 2 in body | 1 | 19 12/" between flanges, 3.8L engine only | |||||
| BN-240L2 |
front: 10" rear: 10" |
2 in pipes, 2 in body | 1 | 19 1/2" between flanges, 3.0L engine only | |||||
| BN-240M | no hanger | 4 bolt outlet | |||||||
| BN-240N | 1-2" below rear flange, 1 in center side of rear body, 1-1 1/4" below front flange, 1 in center side of front body | 6 1/2" | 1 | 2-2 bolt inlet, 4 bolt out | |||||
| BN-241 | |||||||||
| Part # | Neck Length | Sensors | Hanger on Body | Hanger on Pipe | Additional Info |